ITEM #: 13416312WiFi Texas WT-AT-8-48v120w
Gigabit 8 port PoE Injector with 48 volt 120 watt power supply
This midspan PoE injector provides power and data onto an Ethernet cable using Mode A (pins -1, 2 and +3, 6). All devices receive the same voltage (48v) and will share up to a total of 120 watts as negotiated by the powered device. Check device specs for power needs to determine the appropriate budget for all devices.
Applications:
- 802.11ac WiFi access points like Aruba,...
ITEM #: 13416312WiFi Texas WT-AT-8-48v120w
Gigabit 8 port PoE Injector with 48 volt 120 watt power supply
This midspan PoE injector provides power and data onto an Ethernet cable using Mode A (pins -1, 2 and +3, 6). All devices receive the same voltage (48v) and will share up to a total of 120 watts as negotiated by the powered device. Check device specs for power needs to determine the appropriate budget for all devices.
Applications:
- 802.11ac WiFi access points like Aruba, Cisco, Meraki
- IP Phones like Yealink Grandstream, Polycom etc
- IP Cameras like outdoor dome cameras
- Our PoE Splitters: GAT-USBC, GAT-5v20w, GAT-12v25w, GAT-USBC-Legacy, GAT-MicroUSB, GAT-5v20w-1.35-RA, GAT-12v-2.1, GAT-MS-PRO
Any 802.3at Device
Features:
- Instantly add 802.3at PoE+ to any network switch
- Mix 10/100 and gigabit data rate in one while adding power on the same cable
- Active negotiation detects compatible devices and protects non-PoE devices
- Use for 8 devices with 120 watts total shared power
- Power 802.3at devices like Cisco, Meraki, Aruba 802.11ac devices and More!
- 8 data in, 8 Data + PoE out
- Extend power up to 328 ft or 100 meters