ITEM #: 13224907E x tend the life of final filters
- Pore sizes from 0.5 µm to 1.0 µm
- With or without binders
- Autoclavable
PreSep prefilters are biologically inert and highly resistant to o x idizing agents and weak acids. Primarily used to e x tend the life of a final filter, they can also be used as a low-cost sample clarifier. Prefilters increase the speed of filtration by trapping large particles before they reach the final membrane filter. Frequency and cost...
ITEM #: 13224907E x tend the life of final filters
- Pore sizes from 0.5 µm to 1.0 µm
- With or without binders
- Autoclavable
PreSep prefilters are biologically inert and highly resistant to o x idizing agents and weak acids. Primarily used to e x tend the life of a final filter, they can also be used as a low-cost sample clarifier. Prefilters increase the speed of filtration by trapping large particles before they reach the final membrane filter. Frequency and cost of replacing the final membrane filters is reduced.
Filters with binders are composed of borosilicate glass fibers woven into a porous matri x and bonded by an acrylic resin. The resulting filter reduces media migration and has the strength required for high-volume aqueous filtrations. Ma x imum operating temperature is 165°C (325°F).
Glass prefilters without binders are designed to avoid binder e x tractables during solvent filtration or gravimetric analysis. Not recommended for temperatures e x ceeding 510°C (950°F).
For upstream protection of a membrane within a filter holder, the use of a prefilter that is slightly smaller in diameter than the main filter allows the prefilter to fit inside the O-ring or filter funnel holder seal, ensuring a positive membrane seal. When used as the main filter medium, select a diameter of the same size as the filter holder to be used.
Type G15 Glass Fiber Prefilters with Binders (4749A02 to A14)
- Nominal pore size- 0.5 µm
- High rentention efficiency
- Limited dirt-handling capacity
- Protection of 0.2 µm to 0.8 µm final filters
Type G20 Glass Fiber Prefilters with Binders (4749A20 to A32)
- Nominal pore size- 1.0 µm
- Surface capture of particles
- Average retention efficiency
- Higher dirt-handling capacity
- Protection of 0.8 µm and larger pore size final filters
Type G25 Glass Fiber Prefilters with Binders (4749A40 to A54)
- Nominal pore size- 1.0 µm
- Thickness appro x imately 3.5 times greater than G20
- Depth particle capture
- Average retention efficiency
- Highest dirt-handling capacity
- Recommended for solutions with heavy contaminate loads
- Protection of 0.8 µm and larger pore size final filters
Type G40 Glass Fiber Prefilters WITHOUT Binders (4638D60 to D68)
- Nominal pore size- 1.0 µm
- Average retention efficiency
- Highest dirt-handling capacity
- Recommended for solvent filtration, gravimetric analysis, contamination analysis of wastewater and industrial effluents
TCLP Glass Fiber Filters WITHOUT Binders, 0.7 µm Pore Size (4749A72)
Borosilicate glass fiber filters designed for use in U.S. EPA Method 1311 To x icity Characteristic Leaching Procedure (TCLP). Federal regulations require the filters for this application be made of borosilicate glass fiber, contain no binder materials and have an effective pore size of 0.6 to 0.8 microns.
GE TCLP glass fiber filters have a pore size of 0.7 microns and are binder free. They are used in Zero-Headspace E x tractor Vessels for determining the mobility of semi-volatiles. Filters should be acid washed prior to use with 1N nitric acid followed by three consecutive rinses with deionized water. A minimum of 1 liter per rinse is recommended.
Pore 1.0 Diameter 47 500 / Box Ge Glass Fiber Binderless Filter
This listing is for Pack of 500
